TB-500 Peptide Human Growth Hormone Steroids Muscle Growth
TB-500 (Thymosin Beta-4)
TB-500 is a synthetic version of the naturally occurring peptide
present in virtually all human and animal cells, Thymosin Beta-4.
This potent peptide is a member of a ubiquitous family of 16
related molecules with a high conservation of sequence and
localization in most tissues and circulating cells in the body.
TB-500 not only binds to actin, but also blocks actin
polymerization and is the actin-sequestering molecule in eukaryotic
TB-500 was identified as a gene that was up-regulated four-to-six
fold during early blood vessel formation and found to promote the
growth of new blood cells from the existing vessels. This peptide
is present in wound fluid and when administered subcutaneously, it
promotes wound healing, muscle building and speeds up recovery time
of muscles fibres and their cells. An additional key factor of
TB-500 is that it promotes cell migration through a specific
interaction with actin in the cell cytoskeleton.
It has been demonstrated that a central small amino acid long-actin
binding domain has both blood cell reproduction and wound healing
characteristics. These characteristics are uncovered by
accelerating the migration of endothelial cells and keratinocytes.
It also increases the production of extracellular matrix-degrading
Studies demonstrate that TB-500 is a potent, naturally occurring
wound repair factor with anti-inflammatory properties. Tß4 is
different from other repair factors, such as growth factors, in
that it promotes endothelial and keratinocyte migration. It also
does not bind to the extracellular matrix and has a very low
molecular weight meaning it can travel relatively long distances
through tissues. One of TB-500 key mechanisms of action is its
ability to regulate the cell-building protein, Actin, a vital
component of cell structure and movement. Of the thousands of
proteins present in cells, actin represents up to 10% of the total
proteins which therefore plays a major role in the genetic makeup
of the cell.
TB-500 (Thymosin Beta-4)
Molecular formula: C212H350N56O78S
Molar Mass: 4963.4408
CAS number: 77591-33-4
PubChem: CID 16132341
Synonyms: Thymosin Beta 4
Effects of TB-500 Demonstrated In Recent Studies
Recent laboratory research and clinical studies conducted using
TB-500 (Thymosin Beta 4) have shown that it may promote the
- • Endothelial (blood vessels) cell differentiation
- • Angiogenesis (growth of new blood cells from pre-existing
vessels) in dermal tissues
- • Keratinocyte migration
- • Collagen deposition
- • Decreases inflammation of tissue in joints
- • Increase muscle growth with huge increases in endurance and
- • Relaxed muscle spasm and improved muscle tone
- • Increase the exchange of substance between cells
- • Encourage tissue repair
- • Stretches connective tissue and helps maintain flexibility
- • Prevents the formations of adhesions and fibrous bands in
muscles, tendons and ligaments.
TB-500 MIXING, DOSING AND USE
Type of water to be used with TB-500:
Plain sterile water is the most suitable diluent for TB-500.
Alternatively it can be reconstituted with sterile saline (0.9%
NaCl) or sterile bacteriostatic water (0.9% sodium chloride). Plain
sterile water should be readily available to buy without
prescription in any local pharmacy. Alternatively it can also be
purchased online. It is even available on ebay.
The insulin type syringe with 100 markings on the side should be
used. They are readily available in any local pharmacy store.
How to mix (reconstitute) the TB-500:
Pull 1ml of water into the syringe and inject it into the vial with
powder. You should never shake the vial when mixing. You should not
inject the water directly into the powder with force, but rather
let it gently slide down the inside of the vial. If it bubbles up,
you should put the vial in the refrigerator and leave it there for
about 15-30 minutes. The bubbles will be gone by then. You should
then gently rotate the vial between your fingers until all of the
powder has dissolved (it takes about 3-4 minutes).
The vials are under vacuum, so before you can take the tb-500 out,
you need to release the vacuum. Take a fresh syringe, pull air into
it and inject the air into the vial (not into liquid, but into air
above the liquid). This will get rid of the vacuum. You can then
pull out the reconstituted tb-500 as needed.
TB-500 Injection spot and procedure:
The tb-500 has a systematic effect regardless of where it is
injected. Some believe that thymosin beta-4 should be injected as
close to the injury as possible however there is no evidence to
show this would be superior. It can be injected subcutaneously
(stomach fat) or intramuscularly (shoulders, thighs, buttocks).
Injections should be given in different sites (rotated) each time.
Depending on the spot, you can either feel nothing or you can feel
slight pain - you will learn your favorite spots in time.
Prior to injecting clean the injection spot as well as the vial
rubberstopper with an alcohol swab. Make sure there are no air
bubbles in the syringe. For subcutaneous injection fully insert the
needle at an 45 degree angle, for intramuscular insert it at 90
TB-500 Storage temperatures:
Before reconstitution (lyophilized / freeze dried powder):
- refrigerated between 2 - 8 degrees celsius (36 - 46 Fahrenheit)
it's good for 24 months
- at room temperature (up to 37 degrees Celsius or 98.6 Fahrenheit)
it's good for over 90 days
- up to 45 degrees Celsius or 113 Fahrenheit it's good for about a
After reconstitution (liquid):
TB-500 dosage and cycle duration:
Dosage depends on the purpose and severity of the injury / damage
you are treating. People generally use between 4 to 8 mg of TB500
per week during the initial (loading) period of 4 to 6 weeks.
Afterwards some opt to maintain the effects with a low 2 to 6 mg
dose once every 2 weeks. The effects of TB-500 wear off within 2 -
3 weeks of injection.
1. TB-500 loading phase:
- liquid TB-500 should be refrigerated between 2 - 8 degrees celsius
(36 - 46 Fahrenheit) at all times. Do not freeze it.
- reconstituted TB-500 should be used within 8 days
- duration: between 4 - 6 weeks
- dosage: between 4 - 8 mg of TB-500 per week
- frequency of injection:2 mg per injection, between 2 - 4 times per week (depending on the
total weekly dosage)
- 2. TB-500 maintainance phase:
- duration: as long as needed
- dosage: between 2 - 6 mg of TB-500 per 2 weeks
- frequency of injection:2 mg per injection, between 2 - 3 times per 2 weeks (depending on
the total bi-weekly dosage)
EFFECTS OF TB-500 (THYMOSIN BETA-4)
Effects of TB-500 are dosage dependent and usually become
noticeable within days. For some people it takes up to 4 weeks.
Individuals may respond to the therapy differently, however some
effects are generally observed by most people.
Desirable effects of TB-500:
- differentiation of endothelial cells (blood and lymphatic vessels)
- growth of new blood cells
- keratinocyte migration
- collagen deposition
- decreases inflammation in various tissue types
- decreased inflamation in joints
- increase muscle growth
- increases in endurance and strength
- relaxed muscle spasm and improved muscle tone
- repair damaged heart tissue following a heart attack
- healing of ulcers and lesions (including stomach and intestinal
- increased exchange of substance between cells
- overall tissue repair
- faster healing of wounds
- repair of tendons and ligaments
- improved flexibility of joints
- prevents the formations of adhesions and fibrous bands in muscles,
tendons and ligaments
- promotes hair growth
- protects and restores neurons after brain injury
Side effects of TB-500 (Thymosin beta 4):
There have been no reported side effects during the past few years
since TB-500 became popular by athletes. For some reason people
expect the TB-500 to produce flu-like symptoms. After thorough
research through every Thymosin beta-4 related usage log on
bodybuilding forums, there are simply no reports to confirm any